REVIEW: The Scylla Tentacle / Die Skylla Tentakel (2)

The Scylla Tentacle / Die Skylla Tentakel (2)

Manufacturer: Micro Art Studio (MSA), POLAND
Miniatures designed by Krysa Project.

RRP = EUR 12,30

Price at SPIEL Essen = EUR 10,00

Retail blister bought at SPIEL Essen / GERMANY

Reverse side of the blister

Including Warning message by the manufacturer: This product is not a toy.

The Blister pack contains small parts, not suitable for children under 14 years.  ;)




Content:

This set contains two high quality resin casted miniatures in the scale of 28 mm scale plus two 30 mm round plastic bases. Miniatures are supplied unpainted in blisters and were designed for the Wolsung World.

To find out further details and information about Wolsung, check out the Wolsung website and Forum.



http://wolsung-ssg.com/


The blisters include the required colourful characteristics cards.

front

back

Close ups:

Tentacle no. I

Perfect underside!

Tentacle no. II

very small moulding lines on the reverse side of the tentacle

The one and only air bubble.

Miniatures assembled on round lip bases:

The Scylla Tentacles compared to other TT miniatures:

The miniatures on the left (HORDES, Trollblood) and on the right (Imperial guard) are not included.

Non-MSA miniatures shown only for scale comparision.

Conclusion:

The miniatures are produced very well, ready to put on the bases and let's play WOLSUNG.
One of the best tentacle miniatures released within the TT miniature market. You can also use these miniatures within other TT games or collect them to paint and display these in your miniature showcase. You can also use these tentacles for conversion or as sea monster markers.

Where can I buy these miniatures - The Scylla Tentacle for WOLSUNG?

https://shop.microartstudio.com/de/henchman/610-the-scylla-tentacle-5905133597883.html


Related products and miniatures:

Henchmen / Handlanger und Gefolgsleute

https://shop.microartstudio.com/de/231-henchman


The Scylla - Abomination

https://shop.microartstudio.com/de/henchman/609-the-scylla-abomination-5905133597395.html





MAIN PAGE: Micro Art Studio (MSA)

https://microartstudio.com/
https://shop.microartstudio.com/de/
https://shop.microartstudio.com/de/255-neuheiten

#HobbyBunkerSchriesheim #HBS # MicroArtStudio #MSA #WOLSUNG # TheScylla #Tentacle 

REVIEW: HORDES - MINIONS Faction Dice / Würfelset

HORDES - MINIONS Faction Dice / Würfelset

Manufacturer: Q-Workshop*, POLAND
licenced product for Privateer Press Inc., USA

RRP: 16,40 EUR*/**

This set of six premium six-sided dice, designed by Privateer Press and manufactured by Q-Workshop, includes fice dice featuring the Colors and iconography of the MINIONS and one HORDES die perfect for AOE Deviation and damage Location rolls.

 "Show your faction pride with the official dice of HORDES!" 

* Q-Workshop, www.Q-workshop.com , https://q-workshop.com/en/
  RP = EUR 9,84

** Spielbetrieb Heidelberg, www.spielbetrieb-heidelberg.de
  RP = EUR 14,00

#HobbyBunkerSchriesheim #HBS #PrivateerPress #HORDES #MINIONS #Q-Workshop #FactionDice #OfficialDice

REVIEW: Textured roller „Small Cobblestone“ 1223 / Texturrolle „Kleine Kopf-Stein-Pflastersteine“

REVIEW: Textured roller „Small Cobblestone“ 1223 / Texturrolle „Kleine Kopf-Stein-Pflastersteine“

Manufacturer: Green Stuff World International, SPAIN
Article no.: 8436554363742ES

RRP = EUR 15,00, reduced price = EUR 12,00

GSW Article no.: 8436554363742ES

One single textured roller. Theme „Small Cobblestones“.

The product includes a single roller, protected by a plastic tube plus sealing cap. A product information sheet shows the customer the single Green Stuff World article no., product name and a quick step product instructions on the front side, and the same multilingual information in English / German / Spanish and French language on the reverse side.

Dimensions of the textured roller:

Length: 14,5 cm (5’5 inches)

Diameter: 2,5 cm (1“ inch)
Brick pattern size: approx. 2x5 mm up to 2x5 mm

The rounded bricks are all individual and combined with multiple stone types.

This textured roller and moulded results are recommended for your bases and miniatures in the scale of 1/35, 1/43, 1/48 or 1/76.

http://www.greenstuffworld.com/en/textured-rolling-pins/373-rolling-pin-hobby-roller-small-cobblestone.html

http://www.greenstuffworld.com/de/strukturierte-teigrolle-/373-strukturierte-teigrolle-texturierte-kleine-kopfsteinpflaster-rollstab-modellierrolle.html

The textured roller is produced very well, without any sharp sections.

So, no injuries should be expected. Safty first, work safe, go home safe! 😉

Hobby Bunker Schriesheim has used the textured rollers during our terrain modelling workshops and especially in cases of modelling individual bases for single miniatures and/or complete TableTop armies.

One of the helpful materials to mould streets, pavements, smaller or larger cobble stones can be the epoxy putty „Blue/Yellow Green Stuff“ distributed by Green Stuff World International.

The textured rollers can be used very easy. Mix your green stuff modelling clay in the indivual size and stretch out the green stuff on your clean cutting mat, HDF or foam plate.

The modelling clay should have a smooth consistence. Now, You can start with the moulding steps.

Hold the textured roller in both hands, push down the roller and roll over the modelling clay over the whole area. It is very important to carry out the same pressure. If you push to hard on one of the textured areas in the modelling clay, the texture can be interrupted compared to the whole moulded clay. Hobby Bunker Schriesheim recommends to use petroleum jelly or enough water to prevent sticking greent stuff at the textured roller after releasing the two parts at the end.

One single point of criticism*: the deepest areas of each textured roller has a raw surface with small grooves. These structure will be reflected on the modelling clay after rolling over it. One will love this structure effects, another would like to have a very perfect clean surface in this case.

raw surface 

This part of structure is okay from our point of view, because some club members would like to have especially these raw surface on their Cobblestone and prevent bases… and the other club members polished the highest parts of the stones with water and a sculpting tool. So, It is up to you to try out these textured rollers with different themes.

It is also very important to clean up the textured roller to prevent closing fine details and small scaled lines on the textured rollers after you have finished your moulds at the end.

We have tested the textured rollers, Pavement (1301), Small Cobblestones (1374) and Celtic (1223). We are impressed by the small details, easy handling and last but not least the final moulded results.

Highly recommended for all beginners and advanced painters, model builders and TableTop artists.

*Perhaps Green Stuff World International can improve this raw surfaces a little bit in future.

BTW: Green Stuff World offers different sizes related to different scales: (XL, 12-15-20 mm, 25-28 mm, 32-35-45 mm scale).

http://www.greenstuffworld.com/en/51-textured-rolling-pins

http://www.greenstuffworld.com/de/51-strukturierte-teigrolle-

Green Stuff World provides rebates between 20,00% up to 28,00% as a product discount at the moment these textured rollers.

Related products:

Textured roller display / Rolling pin Display

http://www.greenstuffworld.com/en/textured-rolling-pins/628-rolling-pin-display-with-tubes.html

http://www.greenstuffworld.com/de/strukturierte-teigrolle-/628-strukturwalze-warentraeger-mit-schutzrohren.html

Silicon Guide Rings

http://www.greenstuffworld.com/en/inicio/540-silicone-guide-rings.html

http://www.greenstuffworld.com/de/inicio/540-silikon-fuehrungsringen.html

The textured roller „Small Cobblestone“ 1374 produced and sponsored by Green Stuff World International (GSW).

#HobbyBunkerSchriesheim #HBS #GreenStuffWorld #GSW

#TexturedRoller #Cobblestone #GreenStuff #AmazingTools #TexturedRollingPins

RELEASE: new scenery center piece "PROMETHIUM CHIMNEY - LARGE"

NEWS

KROMLECH / TabletopScenics / BitsofWar has released a new scenery "PROMETHIUM CHIMNEY - LARGE".

Picture made by KROMLECH © by KROMLECH / Tabletop Scenics / Bits of War

Picture made by KROMLECH © by KROMLECH / Tabletop Scenics / Bits of War

Picture made by KROMLECH © by KROMLECH / Tabletop Scenics / Bits of War

Dimension: Height 42 cm Width 32 cm Depth 32 cm

Designed for 28 mm scale.

It fits perfectly to NECROMUNDA and all other SciFi TableTop Wargames as like Warhammer 40.000 (W30K/W40K) or as like GORKAMORKA.

It's up to you to show this beautiful scenery center piece on YOUR gaming table!


All of you can order the "Promethium Chimney - Large" via

https://bitsofwar.com/home/795-promethium-chimney-large.html

RRP = EUR 64,99


Source: http://www.tabletopscenics.com/ ; https://bitsofwar.com

related pages:

http://www.kromlech.eu/

https://bitsofwar.com/

http://www.tabletopscenics.com/

#HobbyBunkerSchriesheim #KROMLECH #TabletopScenics #BitsofWar #Terrain #CenterPiece #Tabletop

RELEASE: Dungeon Plunger Cutter / Fliesen-Präge-Stempel by GSW

NEWS

Green Stuff World (GSW) has released a new amazing tool after the Nuremberg International Toy Fair 2018.

Product genre: Stamp / Cutter / *Amazing Tools

You will have the opportunity to create your own dungeons and bases by using this cutter/stamp. Available for different base sizes (25 mm / 32 mm).   

Picture made by GSW, © by Green Stuff World International

Picture made by GSW, © by Green Stuff World International

Picture made by GSW, © by Green Stuff World International

Source: Green Stuff World International

             

http://www.greenstuffworld.com/en/inicio/689-dungeon-plunger-cutter.html

http://www.greenstuffworld.com/de/inicio/689-fliesen-praegestempel.html 

#HobbyBunkerSchriesheim #GreenStuffWorld #GSW #DungeonPlutterCutter #AmazingTools