Posts mit dem Label Modelliermasse werden angezeigt. Alle Posts anzeigen
Posts mit dem Label Modelliermasse werden angezeigt. Alle Posts anzeigen

Dienstag, 20. Februar 2018

REVIEW: Textured roller „Small Cobblestone“ 1223 / Texturrolle „Kleine Kopf-Stein-Pflastersteine“



REVIEW: Textured roller „Small Cobblestone“ 1223 / Texturrolle „Kleine Kopf-Stein-Pflastersteine

Manufacturer: Green Stuff World International, SPAIN
Article no.: 8436554363742ES
RRP = EUR 15,00, reduced price = EUR 12,00

GSW Article no.: 8436554363742ES

One single textured roller. Theme „Small Cobblestones“.




The product includes a single roller, protected by a plastic tube plus sealing cap. A product information sheet shows the customer the single Green Stuff World article no., product name and a quick step product instructions on the front side, and the same multilingual information in English / German / Spanish and French language on the reverse side.




Dimensions of the textured roller:

Length: 14,5 cm (5’5 inches)
Diameter: 2,5 cm (1“ inch)
Brick pattern size: approx. 2x5 mm up to 2x5 mm

The rounded bricks are all individual and combined with multiple stone types.
This textured roller and moulded results are recommended for your bases and miniatures in the scale of 1/35, 1/43, 1/48 or 1/76.



The textured roller is produced very well, without any sharp sections.
So, no injuries should be expected. Safty first, work safe, go home safe! 😉



Hobby Bunker Schriesheim has used the textured rollers during our terrain modelling workshops and especially in cases of modelling individual bases for single miniatures and/or complete TableTop armies.

One of the helpful materials to mould streets, pavements, smaller or larger cobble stones can be the epoxy putty „Blue/Yellow Green Stuff“ distributed by Green Stuff World International.

The textured rollers can be used very easy. Mix your green stuff modelling clay in the indivual size and stretch out the green stuff on your clean cutting mat, HDF or foam plate.


The modelling clay should have a smooth consistence. Now, You can start with the moulding steps.

Hold the textured roller in both hands, push down the roller and roll over the modelling clay over the whole area. It is very important to carry out the same pressure. If you push to hard on one of the textured areas in the modelling clay, the texture can be interrupted compared to the whole moulded clay. Hobby Bunker Schriesheim recommends to use petroleum jelly or enough water to prevent sticking greent stuff at the textured roller after releasing the two parts at the end.





One single point of criticism*: the deepest areas of each textured roller has a raw surface with small grooves. These structure will be reflected on the modelling clay after rolling over it. One will love this structure effects, another would like to have a very perfect clean surface in this case.
raw surface / raue Oberfläche
raw surface 
This part of structure is okay from our point of view, because some club members would like to have especially these raw surface on their Cobblestone and prevent bases… and the other club members polished the highest parts of the stones with water and a sculpting tool. So, It is up to you to try out these textured rollers with different themes.

It is also very important to clean up the textured roller to prevent closing fine details and small scaled lines on the textured rollers after you have finished your moulds at the end.

We have tested the textured rollers, Pavement (1301), Small Cobblestones (1374) and Celtic (1223). We are impressed by the small details, easy handling and last but not least the final moulded results.



Highly recommended for all beginners and advanced painters, model builders and TableTop artists.

*Perhaps Green Stuff World International can improve this raw surfaces a little bit in future.

BTW: Green Stuff World offers different sizes related to different scales: (XL, 12-15-20 mm, 25-28 mm, 32-35-45 mm scale).


Green Stuff World provides rebates between 20,00% up to 28,00% as a product discount at the moment these textured rollers.

Related products:

Textured roller display / Rolling pin Display

Silicon Guide Rings

The textured roller „Small Cobblestone“ 1374 produced and sponsored by Green Stuff World International (GSW).




#HobbyBunkerSchriesheim #HBS #GreenStuffWorld #GSW
#TexturedRoller #Cobblestone #GreenStuff #AmazingTools #TexturedRollingPins

Mittwoch, 7. Februar 2018

REVIEW: Blue/Yellow Green Stuff tape 12 inches / Green Stuff Modelliermasse Band mit 30 cm



Blue/Yellow Green Stuff Tape 12 inches / Green Stuff Modelliermasse Band mit 30 cm,

Manufacturer: Green Stuff World International, SPAIN

Article no.: 8436554365029ES
RRP = EUR 6,00, reduced price = EUR 4,50

Epoxy putty
Blue/Yellow Green Stuff tape 12 Inch by GSW







 This set of two-part epoxy putty „Green Stuff“ includes a Green Stuff „yellow/blue“ tape with a length of 12 inches ( = 30 cm) in total.

The blister (14,5x10,7cm) includes also a product information sheet at the front side and a quick step instructions on the reverse side in English, Spanish and French language.

How can you mix the modelling clay?




Hobby Bunker Schriesheim has tested the yellow/blue green stuff tape by cutting the tape in smaller portions. We mixed equal parts of the yellow ( = as filler) and the blue ( = hardener) tape. If you have mixed the green stuff tape, it will hardened after a time period of approx. 90 minutes.




During the time window you will have the opportunity to shape and refining your details of your sculpture. The final hardening process will be reached after approx. 24 hours.

Please keep in mind that you have the option to mix more yellow or blue green stuff in your mixture modelling clay part. This will reduce or raise the hardening process, the final hardening and also the degree of hardness. Light green = softer, dark green = harder.

Epoxy putty – especially green stuff can stick on your tools and fingers sometimes. Tp prevent those unlucky moments Hobby Bunker Schriesheim recommends to use a drop of cooking oil or baby oil. Vaseline or some drops of water can also improve the smoothness of the mixed green stuff.

For beginners it will help you to sculpt a miniature, close open sections between to parts of your modelling kits or to sclupt a terrain section in the process of moving forward the green stuff modelling clay, if you will keep your fingers and also your tools consistent wet.

http://www.greenstuffworld.com/en/green-stuff/1-green-stuff-putty-tape-12-inches.html

http://www.greenstuffworld.com/de/green-stuff-modelliermasse/1-warhammer-green-stuff-green-stuff-modelliermasse-rolle-12-inches.html

We have used the Green Stuff modelling clay during our terrain modelling workshops and especially in cases of modelling individual bases for single miniatures or complete TableTop armies.

One of the helpful tools could be the textured rollers produced by Green Stuff World.










These textured rollers are available in different sizes (XL, 12-15-20 mm, 25-28 mm, 32-35-45 mm scale) and will help you to improve your modelling skills, increase the quickness in finalizing all your bases and armies.

http://www.greenstuffworld.com/en/22-textured-rolling-pins



Related products:


Green Stuff World offers different blisters in different lengths.

So, It is up to you to ordert he green stuff tapes with a length of 6 / 12 / 18 or 36,5 inches (15 / 30 / 46 / 93 cm) in total.

You can also select the Green Stuff epoxy putty as a 100 gram bar package.

Green Stuff World provides rebates between 25,00% up to 40,00% as a product discount of at the moment.


Epoxy Putties

http://www.greenstuffworld.com/en/24-epoxy-putties
http://www.greenstuffworld.com/de/24-epoxidharz-kitt


Blue/Yellow Green Stuff tape provided and sponsored by Green Stuff World International(GSW) located in Alicante / SPAIN